Krista QQ(www.123giftfactory.com) asked:


Before picking up a brush, Learn what lean to fat, value, and more mean and many important terms that you need to learn. Here are terms and tips and every word you need to know about oil painting and it’s necessary termps for producing better paintings.



Long and Short Oil Paint

Oil painting mediums can be used to control the thickness, or consistency, of your oil paint.

Long oil paint means that enough medium has been added that it has very little “peak” (the ability to make small peaks or hills out of the paint) to it. It is smooth and oily. Long paint is used when you want very little brush strokes. Short oil paint is paint straight out of the tube. It is thick and has a lot of “peak” to it, stiff and buttery in consistency.

Some classic mediums are:Linseed Oil, Stand Oil, Safflower Oil, Alkyd Painting Medium etc.



Color Temperature

Color temperature refers to the color’s place on the color wheel. If you divide the color wheel at neutral purple (purple that is neither warm nor cool) and at neutral yellow the wheel will be divided into a “cool” side and “warm” side. Warm colors are colors that have a red tint to them. Cool colors have a blue tint.



Value

Value is the graduation of a color from light to dark. By varying the values in a painting you can achieve what is called contrast, or the sharp difference between light and dark. Adding contrast to a painting adds depth and interest. To see the difference in value in your subject simply put on sunglasses. Your sunglasses will keep you from seeing the actual color, and leave you with just lights and darks.



Layering

There are certain rules that should be followed when painting in oils. These rules keep you from ending up with a muddy mess of a painting.

First, you should always paint from warm to cool, meaning, lay down warm colors first, then cool. This also goes for value, always go from dark to light.

Similarly, you should always lay down your thin paint first (or long paint), getting thicker (short paint) as you go along, using your biggest brush first. Start with big, blocked in objects first, slowly working into more detail toward the end.



* Two typical layering methods for an oil painting as following:

Gesso: Gesso is used to prime a surface or canvass before painting. Basically, it makes paint stick better to the surface. It also keeps it from sinking into the surface. You don’t have to use gesso when painting, but it is worth giving a try.

Varnish: Varnish protects your painting from damage. It is only applied when the painting has thoroughly dried, around six months. Retouch varnish is temporary and can be used as soon as the picture is dry to the touch and can be removed with gum turpentine.

Other familiar ways of layering for oil painting:

1. Canvas

2. Underpainting

3. Thin, long, dark, warm paint

4. Thicker, short, light, cool paint



Now, did you have got an idea about oil painting? try it now!

Ralph Serpe asked:

If you want to learn how to oil paint and not sure how to begin, then the following article will prove to be quite helpful in your pursuit to become a good painter.

Before you read on, you will have to try and forget everything you ever learned about oil painting and look at your painting from a new perspective. A recent art class I attended, taught by a master painter, has completely changed the way I approach oil painting and has opened up many new creative doors for me. I hope it will do the same for you.

START WITH A CONCEPT

Up until just recently, I was a very frustrated oil painter. I have 10 or so incomplete paintings collecting dust in the corner of my small studio. I would attempt to complete these 10 or so paintings over and over again, until finally I had to take a step back and try and understand what I was doing wrong.

The reason I lost interest and was unable to complete these paintings, was because I did not have a concept in mind before I started. I would start haphazardly painting without a clear vision of what I really wanted to accomplish with my oil painting.

Concepts are methods for solving problems in a painting. I bet you never saw painting as being a series of problems. Neither did I , but this way of thinking really does make learning how to oil paint more interesting.

What do you want your painting to be about?

Instead of thinking: “My painting is about trees in a field”, start thinking in terms of , “My painting is about the light that falls on the trees in a field”.

When you have a blueprint or roadmap in mind before you start painting, there is no room for diversion. You must stick to your plan.

MASTER YOUR BRUSH

A very important aspect of oil painting is learning how to control your brush. Without good brush control and technique, your effectiveness as a painter is truly limited.

Make sure you have the best possible brushes you can afford. While it is possible to save money on paint and canvas, one should never work with cheap brushes. In my experience, cheaper brushes are simply not worth it. The biggest issue with cheap brushes is with the hairs falling off and becoming embedded in your painting. It is quite annoying.

One of the biggest mistakes artists make, myself included, is not reloading the paint brush enough. I am not sure if this is an act of laziness or fear of wasting paint. Whatever the reason may be, make sure you always have enough paint on your brush so that there is always a layer of paint between your brush and the canvas. Do not try and scrub the paint into the canvas. Paint your strokes and leave them be. Don’t over work your brushstrokes.

MASSING

One great way to get the main ideas of an oil painting down is with a technique called Massing. Massing is about seeing your subject as a whole and not concentrating on all of the fine details.

For instance, lets say you subject is a pineapple. Instead of trying to get down all the various textures and details on your pineapple, think in terms of “planes” of light and shadow.

Add in those planes first and then later on you can put in all of your finer details.

COLOR

Nothing in my opinion, can confuse a painter more, then working with color. I know one of my weaknesses in the beginning was working with too many colors in the same painting which resulted in a muddy nightmare.

I never really took the time to understand how colors interact with one another.

Here are some great tips to keep in mind while working with color in your paintings:

- If you add white to another color, it will make that color cooler and more opaque.

- Instead of adding white to a color to make it brighter, try adding more color instead.

- Don’t be afraid to use black. Many teachers recommend staying away from black, but I beg to differ. Did you know you can get some very nice greens by mixing ivory black with certain blues and yellows?